Luminaire Level Lighting Controls
Target Audience: |
Engineers & Architects
|
Date and Time: |
August 22nd, 2024 – Noon to 1:00 p.m. MT
|
Location: |
Idaho Water Center - Room #150322 E. Front Street Boise, ID 83702
|
Parking: |
Parking is available underneath the building or in the adjacent parking garage.The first hour of parking is free, each subsequent hour is $1.00.
|
Registration: |
To Register for In-person Attendance* Click Here;WEBINAR Presentation Click Here
|
Description:
LLLCs have sensors and controls within individual fixtures that enable them to be controlled remotely or on a case-by-case basis. Remote control allows users to adjust the programming criteria or illumination levels without replacing the fixtures. In conventional lighting systems, lighting zones are defined as a collective unit and thus are centrally controlled. LLLCs however, incorporate sensors into each fixture, such as occupancy, daylight, temperature or receive/broadcast signals. Each fixture has the potential to become a semi-autonomous zone that is capable of responding to small changes in the area under each fixture. Furthermore, individual fixtures can communicate with other fixtures, using wireless or infrared signals, to share data for an even greater potential to increase energy savings and user satisfaction. Some LLLCs can be connected by gateway to transfer information collected. This data is analyzed, usually through the manufacturer’s software, to provide a user interface different from a typical text editor. From there users are able to identify trends in occupancy and lighting energy consumption that can then be used to refine the building schedules for occupancy and lighting and, if applicable, for the buildings’ HVAC schedule programming.
Bio:
Dylan Agnes